Heavy-Duty Curb Ramps, 4–7 Inch Rise | 2 & 4 Packs

OranLite curb ramps bridge raised curbs and small level changes at driveways, garage approaches and warehouse entrances. Choose a 4, 5, 6 or 7 inch rise and a 2-piece or 4-piece pack to suit your layout. Also called kerb ramps, these black ramps feature a textured driving surface, mounting holes and an underside cable channel.

Curb ramps for driveways and warehouse access

Create a gradual approach to a curb for vehicles, hand trucks and wheeled equipment. For cars, SUVs and forklifts, check the curb height, tire width, ground clearance and wheel loading before selecting a ramp. Position the ramps in line with the wheels, with the high end against the curb and the low edge on the lower surface.

Product features

• 32,000 lb load capacity: the specified capacity for this product. Confirm suitability for your vehicle and installation before use; pack quantity does not increase the stated rating.
• Textured surface: raised leaf-shaped tread and ribs provide a textured path for wheels.
• Rubber and PVC construction: a black molded body with reinforced underside sections.
• Underside cable channel: an arched passage beneath the ramp; check your cable dimensions against the product drawing.
• Mounting holes: recessed holes allow the ramp to be secured where the installation requires it.
• Four rise options: 4, 5, 6 and 7 inches, each available in 2PCS and 4PCS packs.

Choose the correct rise and pack quantity

1. Measure the vertical rise from the lower surface to the top of the curb. Select the matching height.
2. Check the full dimensions below and the linked drawing, including the ramp footprint and clearance for your vehicle.
3. Choose 2PCS or 4PCS: 2PCS contains two ramps; 4PCS contains four ramps of the selected height.
4. Check placement: each wheel must be supported by a correctly aligned ramp on a firm, level base.

Dimensions and product drawings

Compare the listed dimensions for each rise option. Download the corresponding drawing for a closer look at the product geometry.

Placement and installation

Clear debris from the supporting surface. Set the tall rear face flush against the curb and the low edge on the lower level. Align the ramp with the wheel's direction of travel and check that it sits firmly before use. For fixed installations, select mounting hardware suitable for the supporting surface.

Frequently asked questions

What is the difference between a curb ramp and a kerb ramp?

They refer to the same type of product. “Curb” is the common US spelling and “kerb” is commonly used in British English.

Which heights and pack sizes are available?

Choose a 4, 5, 6 or 7 inch rise. Every height is available in a two-ramp pack or a four-ramp pack. Select both Size and Qty before adding to your cart.

Can these ramps be used for cars and forklifts?

Vehicle suitability depends on curb height, tire width, ground clearance, wheel load and the installation. Check these requirements against the selected ramp and contact OranLite if you need help choosing.

Does a four-piece pack have a higher load rating?

4PCS describes the number of ramps supplied. It does not change or multiply the stated 32,000 lb load-capacity specification.

Do the ramps have mounting holes and a cable channel?

Yes. The ramps have recessed mounting holes and an arched underside channel. Refer to the drawing for the selected size when planning placement or cable routing.

Compare more curb ramps and access ramp options from OranLite.

Product videos